#
# Regcal002
# Prepared for post-launch calibration
# Zero second exposure with the shutter closed to determine the ADC offset.
# This sequence assumes the hardware window has been set and so uses
# readout sequence 3 (mcrw)
# Copied from FM TV sequence 51
# 07/09/06	mcrw
#

$sequence_number = 51;

sequence_id(0x0002)
sequence_repeats(1)

# sci_ops goes here
xrt_flare_trigger = disable
eis_aec           = disable
eis_event_trigger = disable
eis_flare_trigger = disable

eis_sci_op(xrt_flare_trigger, eis_aec, eis_event_trigger, eis_flare_trigger)

id		= 0x0002
mip             = 0
loop_cntr       = 1
data_comp       = 0
ocb_x           = 1
ocb_y           = 1
flush_seq_id    = 2
num_flush       = 5
exp_per_ras_pos = 1
asrc_ctl        = 0
ro_node         = 0xF
ras_repeats     = 1
asrc_skip       = 0
ro_seq_id       = 3
mirror_step     = 0
line_list       = 0

eis_run_raster(id, mip, loop_cntr, data_comp, ocb_x, ocb_y, flush_seq_id, num_flush, exp_per_ras_pos, asrc_ctl, ro_node, ras_repeats, asrc_skip, ro_seq_id, mirror_step, line_list)

here:

# 0 second exposure
exp_time_10ms = 0

# Normal exposure
eis_start_exp(exp_time_10ms)

eis_set_seq_loop("here")

eis_stop_seq(51)